ATX® Seal Row Bench
$925.00
Item No: ATX-SRB-700
2 in stock
DESCRIPTION
| Weight | 75 kg |
|---|---|
| Dimensions | 142 × 80 × 60 cm |
| Resistance | Plate Loaded |
| Mounting Type | Free Standing |
| Back Trainers | Rowing Machines |
| Weight | 65kg |
| Weight Capacity | 500kg |
| Height | 95cm |
| Certification | EN 20957 I.II.IV – S |
| Footprint | 142x125cm |
ATX-SRB-700 ATX® SEAL ROW BENCH
Seal Rows are one of, if not the best, ways to work your back muscles if you have a sensitive lower back. Whether that be from a pre-existing injury or after a heavy deadlift day. Alternatively, if you are fighting fit, it is one of the best ways to really isolate the back muscles.
https://www.youtube.com/watch?v=XsIxX6aTKgw
Prone Row Bench Construction
Made from 60 mm x 60 mm x 2 mm thick steel.
Safe Working Load – +500 kgs
Distance between uprights – 120 cm. (outer)
Height to the top of the pad – 95cm
Depth – 142cm
Base Weight – 65kgs
Adjustments
Total adjustment positions – 11
Adjustment Position Spacing – 26 mm
Heavy-Duty J-Hooks with thick rubber strip.
Stepping Plate
Can be mounted on either side.
Anti-Slip corrugated surface.
Height to the top of the plate – 41.5 cm.
Width – 42 cm
Depth – 35 cm
High Quality Padding
Pad Length – 130 cm
Pad width at the Top – 29 cm
Pad Width at the Bottom – 40 cm
Pad Thickness – 5.5 cm
Reinforced
Each joint is reinforced with 2 x 5 mm thick steel plates.
High Tensile Strength M12 Hardware.
Transport
The barbell prone row bench can be moved easily thanks to:
Transport handle located at the front of the unit.
Ball Bearing Wheels are welded to the bottom support beam.
Barbell Protection
Two UMHW nylon strips are screwed into the frame.
J-Hooks, Foam Pad and Nylon Strips can be replaced.
Optional Attachments
The prone row bench is using the same upright specifications as ATX® Squat Racks and Cages.
Allowing you to attach a plethora of optional attachments.
Made from 60 mm x 60 mm x 2 mm thick steel.
Safe Working Load – +500 kgs
Distance between uprights – 120 cm. (outer)
Height to the top of the pad – 95cm
Depth – 142cm
Base Weight – 65kgs
Total adjustment positions – 11
Adjustment Position Spacing – 26 mm
Heavy-Duty J-Hooks with thick rubber strip.
Can be mounted on either side.
Anti-Slip corrugated surface.
Height to the top of the plate – 41.5 cm.
Width – 42 cm
Depth – 35 cm
Pad Length – 130 cm
Pad width at the Top – 29 cm
Pad Width at the Bottom – 40 cm
Pad Thickness – 5.5 cm
Each joint is reinforced with 2 x 5 mm thick steel plates.
High Tensile Strength M12 Hardware.
The barbell prone row bench can be moved easily thanks to:
Transport handle located at the front of the unit.
Ball Bearing Wheels are welded to the bottom support beam.
Two UMHW nylon strips are screwed into the frame.
J-Hooks, Foam Pad and Nylon Strips can be replaced.
The prone row bench is using the same upright specifications as ATX® Squat Racks and Cages.
Allowing you to attach a plethora of optional attachments.
Prior to the Prone Row Bench, lifters would craft all sorts of DIY solutions to perform this exercise. Often this would involve elevating a bench on anything that was handy in the gym. That was perfectly fine in the good ol’ days. However in today’s litigious environment, these contraptions are a lawsuit waiting to happen.
The ATX Prone Row Bench is an affordable way to get a commercial quality unit at a decent price. What makes it even better is the fact it can be easily moved around your gym. It comes with both wheel and a handle so can store it in a more convenient position after your training session.
Reviews
There are no reviews yet.