ATX® Power Rack 755 Short Distance
$1,423.00
Item No: ATX-PRX-755-SD-CFG
Out of stock: "ATX® 750 Multi Grip Chin Up - DISCONTINUED", "ATX® Power Rack 755 Short Distance" do not have sufficient quantity in stock.
Notify me when back in stock.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
DESCRIPTION
| Rack Series | 700 |
|---|---|
| Weight | 129kg |
| Footprint | 123x178cm |
| Colour | Black |
| Inclusions | Base Rack, J-Hooks |
| Certification | Commercial |
| Safe Working Load | 1500kg |
| Height | 225cm |
| Warranty | 5 Years – T & Cs |
ATX® Power Rack 755 Short Distance
The ATX® PRX-755 Power Rack is a genuine commercial power cage which comes with J-Hooks, Spotter Bars and a Multi-Grip Chin Up Bar!
https://www.youtube.com/watch?v=2ioWEXP8-bY
Construction
- Extremely stable thanks to high base weight of 129 kgs (excluding attachments).
- Reinforcement plates at the bottom of the uprights for additional stability improvements.
- 1500 kgs safe working load.
- Free-Standing design with anti-slip feet which can be removed if you want to slide the rack around your gym.
- High-Tensile Strength M20 & M12 (20/12 mm thick) hardware.
- Certified for Commercial Use by European standards – EN 20957 I.II.IV – S.
J-Hooks
The Power Rack comes with a pair of ATX® PRX J-Hooks V 70mm.
Which are manufactured out of 10 mm thick solid steel sheet and feature a 12 mm thick rubber strip for barbell knurling protection.
There are two optional J-Hooks which are compatible with this rack:
ATX® Roller J-Hooks Universal (ATX-FH7-ROL)
ATX® PRX Monolift (ATX-MLIFT-COP)
Short Distance Spacing
The short distance spacing was first put into effect by Westside Barbell owner Louie Simmons.
The 2.5cm spacing is half the length of standard spacing and allowed equipped powerlifting and bench press enthusiasts to minimize the distance lifted between unracking the barbell and the starting position, helping them save that extra bit of energy.
The shorter centre distance between the adjustment positions also allowed the lifters to find the correct height for the safety spotter arms & bars.
Upright Configuration
This rack is constructed from a 70 mm x 70 mm steel tube with a 3 mm wall thickness.
The rack uses a mix of high tensile industrial-grade M20 and M12 hardware to keep it in place.
Laser Engraved scaling for easier hole identification.
Lat Pulldown
Expand your Power Rack with the Optional Lat Tower Option.
Choose between:
- ATX® Lat Option 750 Plate Loaded (ATX-LTO-750-PL)
- ATX® Lat Option 750 Weight Stack 125 kgs (ATX-LTO-750-SW)
Weight Storage
You can attach the weight plate holders straight to the uprighs:
- ATX® Weight Plate Pins 220 mm (ATX-WPP-220)
- ATX® Weight Plate Pins (ATX-WPP-810)
Or to the ATX® 750 Rack Extension (ATX-EXT-PRX-750)
- Extremely stable thanks to high base weight of 129 kgs (excluding attachments).
- Reinforcement plates at the bottom of the uprights for additional stability improvements.
- 1500 kgs safe working load.
- Free-Standing design with anti-slip feet which can be removed if you want to slide the rack around your gym.
- High-Tensile Strength M20 & M12 (20/12 mm thick) hardware.
- Certified for Commercial Use by European standards – EN 20957 I.II.IV – S.
https://samsfitness.wonderfoundry.com/wp-content/uploads/2021/11/ATX-PRX-750-gym-.mp4
The Power Rack comes with a pair of ATX® PRX J-Hooks V 70mm.
Which are manufactured out of 10 mm thick solid steel sheet and feature a 12 mm thick rubber strip for barbell knurling protection.
There are two optional J-Hooks which are compatible with this rack:
ATX® Roller J-Hooks Universal (ATX-FH7-ROL)
ATX® PRX Monolift (ATX-MLIFT-COP)
The short distance spacing was first put into effect by Westside Barbell owner Louie Simmons.
The 2.5cm spacing is half the length of standard spacing and allowed equipped powerlifting and bench press enthusiasts to minimize the distance lifted between unracking the barbell and the starting position, helping them save that extra bit of energy.
The shorter centre distance between the adjustment positions also allowed the lifters to find the correct height for the safety spotter arms & bars.
This rack is constructed from a 70 mm x 70 mm steel tube with a 3 mm wall thickness.
The rack uses a mix of high tensile industrial-grade M20 and M12 hardware to keep it in place.
Laser Engraved scaling for easier hole identification.
Expand your Power Rack with the Optional Lat Tower Option.
Choose between:
- ATX® Lat Option 750 Plate Loaded (ATX-LTO-750-PL)
- ATX® Lat Option 750 Weight Stack 125 kgs (ATX-LTO-750-SW)
You can attach the weight plate holders straight to the uprighs:
- ATX® Weight Plate Pins 220 mm (ATX-WPP-220)
- ATX® Weight Plate Pins (ATX-WPP-810)
Or to the ATX® 750 Rack Extension (ATX-EXT-PRX-750)
Reviews
There are no reviews yet.