ATX® Power Rack 610 195cm for Low Ceilings
$895.00
Item No: ATX-PRX-610
Out of stock
Notify me when back in stock.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
DESCRIPTION
| Weight | 82.3 kg |
|---|---|
| Dimensions | 191 × 45 × 48 cm |
| Rack Series | 600 |
| Weight | 77.5kg |
| Footprint | 121x146cm |
| Colour | Black |
| Inclusions | Base Rack, J-Hooks, Spotter Bars, Multi-Grip Chinup Bar |
| Certification | Domestic |
| Safe Working Load | 650kg |
| Height | 195cm |
| Warranty | 5 Years – T & Cs |
M12Series 500
M12Series 600
M12Series 600
M12Series 700
M20 / M12Series 700
M20Series 800
ATX®Power Rack 610 195cm for Low Ceilings
The ATX Low Ceiling Power rack is designed for those who don’t have a warehouse-sized garage to dedicate to their gym. If you did fall under the category of people with limited space/clearance you traditionally only had a couple of options: squat stands, or pull out the angle grinder and give your power cage a haircut. Both of these options are a compromise.
The ATX®PRX 610 Power Cage has been designed for compact spaces in European cities. Just like Europe, Australians living in capital cities are squeezing gyms into smaller and smaller premises. Finally, Aussies can get their hands on a fully-featured power rack that is under 2 metres tall.
- Massive 650kg safe working load.
- 5-Year Manufacturers Warranty.
- Comes standard with multi-grip chin-up bar, j-hooks and spotter bars.
- Barcode markings on the uprights for easier identification and adjustment.
- Certified for Domestic Use ‐ EN 20957 I.II.IV ‐ H.
- 30 adjustment positions spaced out every 5cm.
Construction
Everybody marvels at German engineering for high-end products like luxury cars and appliances. However, basic products like the Low Ceiling Power Rack should not be overlooked. While it may look like a standard design, it boasts some very clever, yet subtle design elements.
By welding the support brackets on the 60mm x 60mm uprights, it not only makes the rack easier to assemble, but also adds greatly to its stiffness. High tensile steel nuts and bolts tighten these quality materials up for maximum strength. This rack will perform just like a more expensive one while squeezing in places other racks can‐t.
Inclusions
The J-Hooks are bent into the ideal shape out of a 10mm thick steel plate, making them stronger than you will ever need. The J-Hooks also comes with a 10mm thick UMHW nylon sleeve. This will reduce noise and save your barbell‐s knurling/coating.
The Pin-Pipe Spotter System is manufactured out of solid 20 mm thick steel tube. They are sheathed with a 38 x 3 mm thick steel casing for extra strength and easier barbell adjustment during exercises like pin press.
Multi-Grip Chin-Up Bar ‐ Four knurled grips with a straight chin-up bar in the back.
Compact Footprint
The most notable feature of the ATX®PRX 610 Low Ceiling Power Cage is the significantly reduced height (just 195 cm!). Which makes it suitable for places where height is an issue ‐ attic/garage/basement.
With the cage being 146 cm deep and the ability to wheel your bench inside of the cage, you won‐t need that much additional space to train compared to some of the Half Racks or even Spotting Stands. The upside is with the full-sized power cage you won‐t be compromising on quality and safety.
Despite the compact footprint, you can utilise the majority of attachments and accessories offered for the 600 series power racks. Best of all there is the ATX-LTO-510 Lat Option, which is also designed specifically for the 195cm cage.
IMPORTANT
What you will be getting with the base listing:
ATX®Power Rack 610 195cm (ATX-PRX-610), Chin Up Bar, J-Hooks (ATX-FHT5-0600), Pin Pipe Spotter Bars (ATX-PPS-65)
Please note the pictures may feature optional attachments or items which are not included with the unit, this is to show the possible configurations of the unit.
Scroll down to see the range of compatible accessories!
Reviews
There are no reviews yet.