ATX® Flat Incline Bench 610
$495.00
Item No: ATX-MBX-610
19 in stock
DESCRIPTION
| Weight | 33 kg |
|---|---|
| Dimensions | 133 × 40 × 25 cm |
| Bench Type | Flat/Incline |
| Number of Adjustments | 9 |
| Bench Height | 44cm |
| Back Pad Dimensions | 123.5x25cm |
| Certification | Domestic |
| Weight Load Capacity | 500kg |
| Weight | 29kg |
| Warranty | 5-Year |
| Adjustment Positions | 0? – 80? |
| Footprint | 130x64cm |
| Inclusions | Sold Individually. |
he ATX Flat Incline Bench 610 (ATX-MBX-610) is your no-frills home gym hero, delivering German-engineered quality for heavy bench presses and incline work at a price that leaves cash for plates. With a 500kg load capacity and a compact design, it’s perfect for home gyms or PT studios on a budget. Adjust from flat to 83° for chest, shoulders, and arms, and move it easily with wheels.
Why You Need This:
Rock-Solid Value: 500kg capacity and quality pads for heavy lifting without the premium price tag.
Compact & Mobile: 123cm length and transport wheels fit tight spaces and move like a breeze.
Versatile Angles: Nine backrest adjustments (0-83°) for flat and incline presses, plus four seat positions.Key Features:
Key Features:
500kg Load Capacity: 70mm x 70mm x 2mm steel tubing handles serious weight, built for home use (EN 20957 Class H).
Nine Backrest Angles: Adjust from 0° to 83° (0, 10, 20, 30, 40, 50, 60, 70, 83°) for presses, rows, and more.
Four Seat Adjustments: Lock in comfort and stability for incline work, preventing slip-offs.
Quality Pads: 5.5cm-thick, 27cm-wide backrest with durable PU leather for comfort and longevity.
Transport Wheels & Handle: Roll it around your gym without breaking a sweat.
Rubber Feet: Vulcanized rubber prevents slipping and protects your floor from scratches.
SAM’S REVIEW
Unfortunately, these days a good quality flat incline bench is going to cost around $500. If you have a budget around this mark you are going to have to make some compromises. If you get a bench at this price that has loads of features the quality will suffer. Alternatively, if you want to get ATX level quality, the bench is going to be basic. But sometimes basic is all you need.
SIMPLE DESIGN BUILT WITH QUALITY PARTS
For starters the pads are made from the same materials as some of the more expensive benches. The pad height is 44cm. They are 27cm wide and 5.5cm thick. Trust me if you get a cheap bench, it will have cheap pads. Whether it is the upholstery or backing board, once the pad goes the bench is pretty much rooted. We get so many calls from people chasing pads for benches that are less than a year old.
If you look from behind, you can see how beefy the structure is. By making the design simple ATX can make the bench rock solid by using 70 x 70mm steel tube. The adjustment ring is made from 8mm thick steel plate and is similar to the system on the MBX-520 bench. It has 9 adjustment positions from flat to upright.
You adjust the positions using the latest ATX pop pin. This is the same one used on their higher end machines. It might not seem like a big deal but trust me pop pins can be an absolute bastards of things. These T style pins do the job and you will see them on plenty of benches and machines. But if you don’t treat them right, they can cause some grief.
I might add that you will see them on equipment that is not cheap. Powertec used them and that is why I know all about them. Personally, I have never broken one after handling thousands of knobs, but I had to replace heaps for people. If the knob was screwed to tight, you could loosen the t-head. People would hit them with things if they couldn’t loosen them.
That is what I like about this bench. Even though it is built to a price point, they have put the best quality parts in the right places.
FLAT BENCH FOR HEAVY LIFTING
The seat pad is a clever design but may put some people off. In the flat position the gap is 65mm which may ring some alarm bells. I am not going to get into the whole no gap bench thing. But here is a bloke benching with nice form on the MBX-610 and you will see his back is arched over the gap.
The gap is just a trade off to deliver the bench at this price point. On the higher end ATX benches the gap is only 35mm. However, this traditional design is more complicated and therefore more expensive. So, if you learn how to sit your ass on the seat section and arch your back it is not going to be an issue.
That is what I like about this bench. If you are a heavy bencher, then this will be a great value option for you. It is IPF height and thanks to the thick rubber stopper, it is really solid in the flat position. The frame structure is very similar to the heavy duty flat bench designs.
AS USED IN EUROPEAN GYMS
Although it is a cheaper ATX bench, and classified as domestic, you can see it being used in gyms and studios in Europe. For a smaller European gym, I can see the appeal. It has simple design so there are less things that can go wrong. It is under 30kgs and has wheels, so it is easily moved. At this price, and if you must buy multiple benches, it is a lot easier on the back pocket.
However, the flat incline bench has ultimately been designed and built for the home user on a tight budget. My next couple of videos are going to showcase some amazing designs by ATX. But this MBX-610 bench shows the other side of ATX – being able to produce simple designs with a quality build at an affordable price.
Reviews
There are no reviews yet.