ATX® Cable Crossover 500 198cm

ATX®
$1,395.00
Item No: ATX-CCS-500-

2 in stock

paypal-seeklogo.com

DESCRIPTION

Weight 73.9 kg
Dimensions 190 × 60 × 60 cm
Weight

70kg

Footprint

279/195x100cm

Height

198cm

Weight Load Capacity

125kg

Certification

EN 20957 I.II.IV – H

Warranty

3 years see T&Cs

The ATX® Cable Crossover has been engineered for garage gyms, it features a low height design of 198 cm, dual carriages and a smooth movement thanks to the custom carriage design.

  1. Ball Bearing Carriage – Most of the units with the carriage design utilize sleeves instead of rollers. While some sleeves work great (take lat machine as an example) other provide a lot of unnecessary friction. The ATX® Engineers designed a roller operating carriage, which not only can handle a lot of weight but also makes the movement much smoother.
  2. High & Low Pulley – This unit features a high and low pulley on each side, allowing you to switch between exercises with no additional adjustment.
  3. Swiveling Pulleys – Both high and low pulley swivel on ball bearings, which further reduces the overall friction.
  4. Low Height – One of the most attractive features of this cable crossover is its low height. At just 198 cm it will easily fit into most sheds and garages.
  5. Reinforcement Brackets – Most of the cable crossover units which feature a similar design, lack the reinforcement brackets, which makes the whole unit feel quite flimsy. ATX® addressed these problems by adding thick reinforcement brackets which bolt onto the unit. There are a total of 4 bolts holding the main upright alone, so you can be sure that there will be no flex in the unit at all.
  6. Floor space – The feet of the ATX-CCS-500 Cable Crossover machine are facing outward, instead of the industry standard inward. This eliminates the tripping hazard and gives you additional real estate for desired activities.
  7. 2:1 ratio – The 2:1 ratio means that the weight loaded onto the unit will he halved due to the mechanical pulley advantage. Normally it would be considered as a downside, but for cable crossovers it is a feature. First the mechanical advantage will allow you to increase the weight in smaller increments, which is a must for accessory exercises. But most importantly you will get additional cable stretch, if you pull the cable 20 cm from the pulley the carriage will only move up by 10 cm.

What’s Included? ATX® Cable Crossover 500 198cm (ATX-CCS-500), 4 x Olympic Adaptors, 4 x Carabiners.

Please note the pictures may feature optional attachments or items which are not included with the unit, this is to show the possible configurations/use of the unit.

Gym Cable Attachments

CUSTOMER REVIEWS

1 review for ATX® Cable Crossover 500 198cm

  1. Justin Cooper (verified owner)

    The final piece of my home gym, it can be hard to find a plate loaded cable Crossover that’s not “flimsy”. ATX kit is seriously solid, typically German, and this one is no exception. Build time was three or so hours with two of us. It’s solid enough to not need ground pinning and the transports either side work beautifully. The 2:1 ratio and the wide top and bottom swivel pulleys are really handy for a smooth and large range of motion forward of the frame; so all those novel delt cable raises, pec crossovers, Bayesian curls etc are possible whilst still maintaining useful loads. I already had a single 1:1 ratio pulley on my cage for heavy pulls so this complements that perfectly.
    I know it seems more expensive than some “Amazon specials” but this is so much sturdier and better quality than those. Home gym finished ; I wish I had found ATX and Sam’s earlier; awesome kit, awesome service. Thanks lads!

Add a review

Your email address will not be published. Required fields are marked *

© 2010 – 2025Sam's Fitness - Equipment for LifeAll Rights Reserved.
  • Item added to cart
Your Cart
The Pulley Cover 120ID is a black, spherical, modern object with a reflective surface and a horizontal opening through the center, set against a white background.
Pulley Cover 120ID
Price: $8.00
- +
$8.00
A close-up image of the Cable Pulley 105mm shows a black textured wheel with metallic bearing at its center, surrounded by radiating spokes. The white background highlights its detailed design.
Cable Pulley 105mm
Price: $10.50
- +
$10.50
Front and side views of the Cable Pulley 50mm, featuring a black exterior with a central metal bearing, are displayed on a white background.
Cable Pulley 50mm
Price: $5.00
- +
$5.00
ATX Folding FID bench
$695.00
The Threaded Foot 45mm M10 is a small, round, black leveling foot featuring a threaded metal rod on top for adjusting furniture or equipment height and stability, set against a plain white background.
Threaded Foot 45mm M10
Price: $2.90
- +
$2.90
Rubber Foot 80mmx40mm
Rubber Foot 80mmx40mm
Price: $7.60
- +
$7.60
The Sting Viper features a black and blue design with 12 KG in white text and central black stitching, offering an appealing blend of functionality and style.
12kg Wall Ball
Price: $35.00
- +
$35.00
A black Medicine Ball from the 2kg - 10kg range featuring red panels and 8 KG printed on it.
8kg Medicine Ball
Price: $30.00
- +
$30.00
The product is the Pulley Cover 117ID, a black, round plastic item featuring a flat base, slightly raised center, and small edge notch. Its surface is smooth and plain.
Pulley Cover 117ID
Price: $8.00
- +
$8.00
ATX® Hanging Ab Straps
ATX® Hanging Ab Straps
Price: $59.00
- +
$59.00
Aluminium Cable Pulley 90mm
Aluminium Cable Pulley 90mm
Price: $29.00
- +
$29.00
A vertical cable exercise machine with adjustable handles, designed for strength training. This sleek metallic cable trainer is wall-mounted and set against a plain white background, perfect for any modern workout space.
$1,745.00