ATX® Power Rack 755 Short Distance

ATX®
$1,423.00
Item No: ATX-PRX-755-SD-CFG

Out of stock: "ATX® 750 Multi Grip Chin Up - DISCONTINUED", "ATX® Power Rack 755 Short Distance" do not have sufficient quantity in stock.

Notify me when back in stock.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
paypal-seeklogo.com

DESCRIPTION

Rack Series

700

Weight

129kg

Footprint

123x178cm

Colour

Black

Inclusions

Base Rack, J-Hooks

Certification

Commercial

Safe Working Load

1500kg

Height

225cm

Warranty

5 Years – T & Cs

ATX® Power Rack 755 Short Distance

The ATX® PRX-755 Power Rack is a genuine commercial power cage which comes with J-Hooks, Spotter Bars and a Multi-Grip Chin Up Bar!

https://www.youtube.com/watch?v=2ioWEXP8-bY

Construction
  1. Extremely stable thanks to high base weight of 129 kgs (excluding attachments).
  2. Reinforcement plates at the bottom of the uprights for additional stability improvements.
  3. 1500 kgs safe working load.
  4. Free-Standing design with anti-slip feet which can be removed if you want to slide the rack around your gym.
  5. High-Tensile Strength M20 & M12 (20/12 mm thick) hardware.
  6. Certified for Commercial Use by European standards – EN 20957 I.II.IV – S.


The Power Rack comes with a pair of ATX® PRX J-Hooks V 70mm.

Which are manufactured out of 10 mm thick solid steel sheet and feature a 12 mm thick rubber strip for barbell knurling protection.

There are two optional J-Hooks which are compatible with this rack:

ATX® Roller J-Hooks Universal (ATX-FH7-ROL)

ATX® PRX Monolift (ATX-MLIFT-COP)

 

ATX-PRX-755-SD heavy duty j-hooks

The short distance spacing was first put into effect by Westside Barbell owner Louie Simmons.

The 2.5cm spacing is half the length of standard spacing and allowed equipped powerlifting and bench press enthusiasts to minimize the distance lifted between unracking the barbell and the starting position, helping them save that extra bit of energy.

The shorter centre distance between the adjustment positions also allowed the lifters to find the correct height for the safety spotter arms & bars.

ATX-PRX-755-SD Power Rack Upright

This rack is constructed from a 70 mm x 70 mm steel tube with a 3 mm wall thickness.

The rack uses a mix of high tensile industrial-grade M20 and M12 hardware to keep it in place.

Laser Engraved scaling for easier hole identification.

ATX-PRX-750 laser engraved scaling

Expand your Power Rack with the Optional Lat Tower Option.

Choose between:

  1. ATX® Lat Option 750 Plate Loaded (ATX-LTO-750-PL)
  2. ATX® Lat Option 750 Weight Stack 125 kgs (ATX-LTO-750-SW)

low pulley on the ATX-PRX-755-SD system

You can attach the weight plate holders straight to the uprighs:

  1. ATX® Weight Plate Pins 220 mm (ATX-WPP-220)
  2. ATX® Weight Plate Pins (ATX-WPP-810)

Or to the ATX® 750 Rack Extension (ATX-EXT-PRX-750)

22 cm long Olympic Weight Horns

  1. Extremely stable thanks to high base weight of 129 kgs (excluding attachments).
  2. Reinforcement plates at the bottom of the uprights for additional stability improvements.
  3. 1500 kgs safe working load.
  4. Free-Standing design with anti-slip feet which can be removed if you want to slide the rack around your gym.
  5. High-Tensile Strength M20 & M12 (20/12 mm thick) hardware.
  6. Certified for Commercial Use by European standards – EN 20957 I.II.IV – S.

https://samsfitness.wonderfoundry.com/wp-content/uploads/2021/11/ATX-PRX-750-gym-.mp4

The Power Rack comes with a pair of ATX® PRX J-Hooks V 70mm.

Which are manufactured out of 10 mm thick solid steel sheet and feature a 12 mm thick rubber strip for barbell knurling protection.

There are two optional J-Hooks which are compatible with this rack:

ATX® Roller J-Hooks Universal (ATX-FH7-ROL)

ATX® PRX Monolift (ATX-MLIFT-COP)

 

ATX-PRX-755-SD heavy duty j-hooks

The short distance spacing was first put into effect by Westside Barbell owner Louie Simmons.

The 2.5cm spacing is half the length of standard spacing and allowed equipped powerlifting and bench press enthusiasts to minimize the distance lifted between unracking the barbell and the starting position, helping them save that extra bit of energy.

The shorter centre distance between the adjustment positions also allowed the lifters to find the correct height for the safety spotter arms & bars.

ATX-PRX-755-SD Power Rack Upright

This rack is constructed from a 70 mm x 70 mm steel tube with a 3 mm wall thickness.

The rack uses a mix of high tensile industrial-grade M20 and M12 hardware to keep it in place.

Laser Engraved scaling for easier hole identification.

ATX-PRX-750 laser engraved scaling

Expand your Power Rack with the Optional Lat Tower Option.

Choose between:

  1. ATX® Lat Option 750 Plate Loaded (ATX-LTO-750-PL)
  2. ATX® Lat Option 750 Weight Stack 125 kgs (ATX-LTO-750-SW)

low pulley on the ATX-PRX-755-SD system

You can attach the weight plate holders straight to the uprighs:

  1. ATX® Weight Plate Pins 220 mm (ATX-WPP-220)
  2. ATX® Weight Plate Pins (ATX-WPP-810)

Or to the ATX® 750 Rack Extension (ATX-EXT-PRX-750)

22 cm long Olympic Weight Horns

CUSTOMER REVIEWS

Reviews

There are no reviews yet.

Be the first to review “ATX® Power Rack 755 Short Distance”

Your email address will not be published. Required fields are marked *

© 2010 – 2025Sam's Fitness - Equipment for LifeAll Rights Reserved.
    Your Cart
    Your cart is emptyReturn to Shop