ATX® Power Rack 770 XL SET-400
$1,035.00
Item No: ATX-PRX-770-SET-400
DESCRIPTION
| Rack Series | 700 |
|---|---|
| Weight | 133kg |
| Footprint | 123x178cm |
| Colour | Black |
| Inclusions | Base Rack, J-Hooks |
| Certification | Commercial |
| Safe Working Load | 1500kg |
| Height | 225cm |
| Warranty | 5 Years – T & Cs |
ATX® Power Rack 770 XL SET
Comes with Flip Down Spotters, J-hooks and Straight Chin Up Bar!
It’s all about size for the ATX® PRX 770 XL Power Cage. If you are an XL sized athlete or happen to be one of those people who like to take three steps back before they begin to squat, you will love the increased depth of this power cage.
Construction
- Extremely stable thanks to high base weight of 133 kgs (excluding attachments).
- Reinforcement plates at the bottom of the uprights for additional stability improvements.
- 1500 kgs safe working load.
- Free-Standing design with anti-slip feet which can be removed if you want to slide the rack around your gym.
- High-Tensile Strength M20 & M12 (20/12 mm thick) hardware.
- Certified for Commercial Use by European standards – EN 20957 I.II.IV – S.
Deep Power Cage
No one has ever complained about having too much space when training. The ATX® PRX 770 is using the same base and uprights as the slightly narrower PRX 750 version.
The only thing which has changed was the top two support beams, which increased the internal footprint of the XL Power Rack by an additional 25 cm, without adding anything to the overall footprint of the Power-Cage.
Spotters
The power rack comes with ATX® Flip Down Spotters 7/95 ‐ Made from thick steel sheets with 12 mm thick rubber strip for barbell protection. Rated to 500kg.
But it is also compatible with the optional ATX® Safety Strap 700 95cm ‐ Made from 2-ply 70 mm wide nylon strap with thick steel buckles which feature nylon strips for rack paint protection. Rated to 500kg.
Upright Configuration
This rack is constructed from a 70 mm x 70 mm steel tube with a 3 mm wall thickness.
The rack uses a mix of high tensile industrial-grade M20 and M12 hardware to keep it in place.
Laser Engraved scaling for easier hole identification.
- Extremely stable thanks to high base weight of 133 kgs (excluding attachments).
- Reinforcement plates at the bottom of the uprights for additional stability improvements.
- 1500 kgs safe working load.
- Free-Standing design with anti-slip feet which can be removed if you want to slide the rack around your gym.
- High-Tensile Strength M20 & M12 (20/12 mm thick) hardware.
- Certified for Commercial Use by European standards – EN 20957 I.II.IV – S.
https://samsfitness.wonderfoundry.com/wp-content/uploads/2021/11/ATX-PRX-750-gym-.mp4
No one has ever complained about having too much space when training. The ATX® PRX 770 is using the same base and uprights as the slightly narrower PRX 750 version.
The only thing which has changed was the top two support beams, which increased the internal footprint of the XL Power Rack by an additional 25 cm, without adding anything to the overall footprint of the Power-Cage.
The power rack comes with ATX® Flip Down Spotters 7/95 ‐ Made from thick steel sheets with 12 mm thick rubber strip for barbell protection. Rated to 500kg.
But it is also compatible with the optional ATX® Safety Strap 700 95cm ‐ Made from 2-ply 70 mm wide nylon strap with thick steel buckles which feature nylon strips for rack paint protection. Rated to 500kg.
This rack is constructed from a 70 mm x 70 mm steel tube with a 3 mm wall thickness.
The rack uses a mix of high tensile industrial-grade M20 and M12 hardware to keep it in place.
Laser Engraved scaling for easier hole identification.
Reviews
There are no reviews yet.